Use Plastic to Make Hammering Safer

A hammer is one of the most useful tools any DIY lover could have, but it's also one of the most dangerous. It's incredibly easy to miss a nail and hammer your finger instead, which is why it's always a good idea to put extra measures in place to keep yourself safe. And one of the best ways to do this is to use some old plastic you have lying around the house.

By fashioning your own little nail cover, you can still keep the nail in place without putting your fingers in danger. And when you're done, simply cut the plastic away.

Use a Large Roller to Make Smaller Rollers

DIY comes in all shapes and sizes, and while some people love to get stuck in and build things from scratch, there are others who prefer to upgrade their homes with paint instead. And while paint rollers are great for getting even coverage on walls, sometimes these rollers are just way too big. But it's super easy to cut a larger roller into smaller ones for these smaller areas of a wall.

All you have to do is take your larger roller and cut it into smaller sections! Just make sure that you use a clamp when you're doing this, to maintain stability when you're cutting.

Use a Caulk Gun as a Clamp

Although the idea of completing a DIY project can be exciting, the excitement can turn sour when you realize that you need to buy loads of new tools to complete the job. But instead of heading to the store and buying a clamp for one small job, why not utilize what you already have in your garage? If you have a caulk gun, you don't need to worry about buying a clamp at all, as it's the perfect substitute.

A caulk gun has its own in-built clamp system, but just remember to remove the caulk bottle before you start clamping. The last thing you want is caulk flying everywhere!

Use PVC Pipe to Make a Tool Holder

Whether you're a professional contractor or more of a hobby DIY-er, you're going to need lots of tools. But if you're used to using multiple tools at once, you'll know that it can be difficult to carry your toolbox around with you from room to room or carry them all in your hands. Thankfully, there is a way to solve that problem! And all you need is a PVC pipe.

By cutting this pipe down one side and attaching it to your belt loop, you can instantly create a tool holder that doesn't require any hands at all. Plus, the tools are easily removable.

Use an LED Light on Your Screwdriver

Screwdrivers are normally used for fiddly little screws - often in small spaces. And while this tool is extremely efficient at doing what it needs to do, it can be problematic when you can't exactly see what you're doing. Yes, no matter whether you're working in a cupboard or undoing the screw on an outlet behind the television, shining a light on the matter can make things much easier. An LED light, to be exact!

By attaching a small LED light to your screwdriver (with some tape), you can see what you're doing without rendering the small screwdriver useless. Just make sure you attach it quite far down the shaft so it doesn't get in the way.

Use Wood to Make a Hammer Rack

Although toolboxes are a great way for contractors and construction workers to take their tools from place to place, home DIY lovers keep all of their tools in one place instead. However, it's easy for tools in a garage to become disorganized and messy - which is why it's always a good idea to find nifty storage solutions for your tools. And if you're looking for a way to organize your hammers, look no further.

You can easily make a hammer rack by attaching a long piece of wood along the side of your garage. Then, simply affix nails or pegs into the wood, and hang your hammers from them.

Use Extra Leverage to Pull Nails

No matter whether you've made a mistake or whether you're pulling up some old and crumbling floorboards, you're probably going to have to pull nails up at some point in your DIY career. But depending on the position and the angle of the nail, this can be pretty difficult. It doesn't have to be, though. Most of the time a hammer just needs a little extra leverage, which is where a screwdriver can come into play.

By placing a screwdriver underneath your hammer, you have extra leverage to pull up the nail and remove it in seconds. It really does make a difference, and can save you a lot of time.