These Tool Hacks Will Make the Lives of DIY Lovers so Much Easier

Published on 06/25/2024
ADVERTISEMENT

Use Rubber Chair Covers for Your Hammer

A hammer is one of those tools that everyone needs in their toolbox. One side can be used to remove nails and lift up floorboards, while the other side can be used to hammer nails into the surface of your choice. However, anyone who has used a hammer before will know that the strength of just one hit of the hammer can leave marks on a surface. So, use rubber chair covers to help you!

By placing these rubber chair covers over the head of your hammer, you can maintain the strength and integrity of the hammer without leaving permanent marks on a surface in the process.

Use Rubber Chair Covers for Your Hammer

YouTube

ADVERTISEMENT

Use a Vise-Grip Plier to Pull Nails

Most people have a hammer hanging around the house. It's one of the most common tools in people's toolboxes, but there might be a time when you find yourself without a hammer. Perhaps you lent it to a contractor friend, or maybe you've just misplaced it. But whatever you've done, you don't need to worry about how you're going to pull nails. After all, a vise-grip plier can work just as well.

The grip of this plier allows you to really grab the nail and pull it out, but if you need a little extra help you could use a wallpaper scraper to help you, too.

Use a Vise-Grip Plier to Pull Nails

YouTube

ADVERTISEMENT

Use Plywood to Check Your Square

There are so many tools out there that claim to help you measure out perfect shapes and lines. But when it comes down to it, these tools often leave room for human error. So, if you're looking to draw a perfect square, you might want to go back to the drawing board and find something else to help you out. And that something definitely should be a piece of factory-processed plywood!

This plywood should have a perfectly straight edge, so you can use that to draw the shorter side of your square shape. Then, mark a line down the long side, and flip the whole thing. If your lines match, you have a perfect square!

Use Plywood to Check Your Square

YouTube

ADVERTISEMENT

Use a Hammer to Measure Things

A measuring tape is one of the most important tools you can have in your toolbox. After all, every single DIY job you complete will probably need to be measured at some point or another. But as a measuring tape is so small, it can easily be misplaced - and this can be a nightmare when you desperately need it. Thankfully, though, there is another tool you can use when you can't find your measuring tape.

By using a hammer as your measuring marker, you can measure anything you need. All you need to do is make a note of the length of your hammer beforehand.

Use a Hammer to Measure Things

YouTube

ADVERTISEMENT

Use Carpet to Cover Your Saw Horse

A saw horse bench is a great tool for people who do a lot of cutting and sawing. It provides a great base structure to support whatever you are sawing, but as these things are made from wood, they can cause a few problems every now and then. Sometimes, the tough wood on the saw horse can cause damage to the thing you're sawing, which is not what DIY lovers want at all.

To combat this, simply cover your saw horse with some kind of soft material! Excess carpet works perfectly for this, and you can attach the carpet using a staple gun.

Use Carpet to Cover Your Saw Horse

YouTube

Use a Bobby Pin to Protect Your Fingers

Hitting your finger or thumb with a hammer is a concept most people are used to. Cartoons love bringing this workplace incident to life, and DIY lovers may have even suffered the pain themselves. So, if you want to avoid it ever happening again, you might want to try out this nifty little hammer trick. All you need to do is place a bobby pin around the thing you're looking to hammer.

The pin will keep the nail in place, meaning that you don't have to use your fingers as a barrier. Then, you can hammer as normal without bruising yourself in the process.

Use a Bobby Pin to Protect Your Fingers

Family Handyman

ADVERTISEMENT

Use a Hammer to Split Wood

Whether you need to chop wood for the fire in your house or for a DIY project, it's no secret that most people use an axe to split their wood. But some novices won't have this tool in their toolbox, which is why we're happy to tell you that there's a more common tool that can work just as well. In fact, those who don't have an axe could use a hammer to split their wood!

Of course, you need to use the claw part of the hammer to do this rather than the head. And when you've done it once, you'll wonder why you've never done it before.

Use a Hammer to Split Wood

YouTube

ADVERTISEMENT